Cypress CY7C67300 manual PWM Cycle Count Register 0xC0FA R/W

										CY7C67300
PWM Cycle Count Register [0xC0FA] [R/W]
Table 130. PWM Cycle Count Register
Bit #	15	14		13	12		11	10	9		8
Field						Count...
Read/Write	R/W		R/W	R/W	R/W		R/W	R/W	R/W		R/W
Default	0	0		0	0		0	0	0		0
Bit #	7	6		5	4		3	2	1		0
Field						...Count
Read/Write	R/W		R/W	R/W	R/W		R/W	R/W	R/W		R/W
Default	0	0		0	0		0	0	0		0

Register Description

The PWM Cycle Count register designates the number of cycles to run when in one shot mode. One shot mode is enabled by setting the Mode Select bit of the PWM Control register to ‘1’.

Count (Bits [9:0])

The Count field designates the number of cycles (plus one) to run when in one shot mode. For example, Cycles = PWM Cycle Count + 1, therefore for two cycles set PWM Cycle Count = 1.

Document #: 38-08015 Rev. *J Page 78 of 99

[+] Feedback