Desktop Computer Power Supply

Removing the Power Supply From the Desktop Computer

1Follow the procedure in "Before Working on Your Computer" on page 9.

2Remove the computer cover (see "Removing the Desktop Computer Cover" on page 21).

3Disconnect the power cables from the system board and the drives.

CAUTION: Note the routing of the power cables underneath the tabs in the computer chassis as you remove them from the system board and drives. You must route these cables properly when you replace them to prevent them from being pinched or crimped.

4Remove the two screws that attach the power supply to the back of the computer chassis.

5Remove the optical drive and set it aside (see "Removing the Optical Drive From the Desktop Computer" on page 59).

110

Power Supply

Page 110
Image 110
Dell 360 service manual Desktop Computer Power Supply, Removing the Power Supply From the Desktop Computer, 110