1 | card retention latch | 2 | alignment guide |
3 | PS/2 serial adapter cable |
|
|
4Disconnect the PS/2
5If necessary, disconnect any external cables connected to the adapter.
6Ease the PS/2
7If you are removing the adapter permanently, install a filler bracket in the empty
NOTE: Installing filler brackets in empty
8Before you close the card retention mechanism, ensure that:
•The tops of all cards and filler brackets are flush with the alignment guide.
•The notch in the top of the card or filler bracket fits around the alignment guide.
9Secure any remaining card(s) by closing the card retention latch and snapping it into place.
10Follow the procedure in "After Working on Your Computer" on page 17.
Installing or Replacing a PS/2
NOTE: If you are replacing a card, uninstall the driver for the existing card. For instructions, see the documentation that came with the card.
1Follow the procedure in "Before Working on Your Computer" on page 9.
2Remove the computer cover (see "Removing the Mini Tower Computer Cover" on page 19).
3Gently lift the release lever on the card retention latch to pivot the latch open. The latch remains in the open position.
42