2

1

3

1

data cable

2

power cable

3

floppy drive connector (DSKT)

 

 

5Follow the procedure in "After Working on Your Computer" on page 17.

6Enable the new floppy drive or media card reader in the system setup program. For information on using the system setup program, see the Dell Technology Guide on your computer or at support.dell.com.

7Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on page 136).

Removing a Floppy Drive or Media Card Reader From the Desktop Computer

1Follow the procedure in "Before Working on Your Computer" on page 9.

2Remove the computer cover (see "Removing the Mini Tower Computer Cover" on page 19).

NOTE: Since the following steps do not require the complete removal of the optical drive, it is not necessary to disconnect the cables connected to the optical drive.

66

Drives

Page 66
Image 66
Dell 360 service manual Data cable