1
6If you are permanently removing this drive:
a Remove the data cable from the computer.
b Follow the procedure in "After Working on Your Computer" on page 17.
c Enter the system setup program and navigate to the Drives section. Under Drive 0 through 3, set Drive to the correct configuration. For more information on using the system setup program, see the Dell Technology Guide on your computer or at support.dell.com
Replacing or Adding a Hard Drive in a Mini Tower Computer
NOTE: This procedure assumes that you have completed the removal procedure first.
1Check the documentation for the drive to verify that it is configured for your computer.
2If you are replacing a hard drive, you must first swap the old drive for the new drive in the existing hard drive bracket (see "Hard Drive Bracket — Mini Tower Computer" on page 74).
3Slide the hard drive into the hard drive bay, gently push until it clicks in place.
72
