
3
2 | 4 |
| |
1 | 5 |
|
|
|
| 6 |
1 | release lever | 2 | filler bracket |
3 | alignment guides (3) | 4 | card |
5 | card retention latch | 6 | system board connector |
4If you are installing a new card, remove the filler bracket covering the empty card slot. To remove a filler bracket, gently insert a scribe under the top edge of the bracket.
5Prepare the new card for installation.
NOTE: For information on configuring the card, making internal connections, or customizing it for your computer, see the documentation that came with the card.
Cards
37