Dell 360 service manual Replacing the Drive Bezel

1 bezel 2 bezel latch

Replacing the Drive Bezel

NOTE: This procedure assumes that you have completed the removal procedure first.

1With the computer set upright, align and insert the clamps on the left edge of the bezel into the bezel clamp slots along the left edge of the front panel.

2Slide the latch downward and hold it in place.

3Rotate the front cover toward the computer until the bezel–grips on the right edge of the cover snap into place, and then release the latch.

4Follow the procedure in "After Working on Your Computer" on page 17.

3

2

1

1	bezel clamps (3)	2 bezel
3	bezel latch

26

Drive Bezel