Dell 360 service manual Removing a PS/2 Serial-Port Adapter From a Desktop Computer

Removing a PS/2 Serial-Port Adapter From a Desktop Computer

NOTE: If applicable, see "Removing a Card From the Optional Riser-Card Cage" on page 50.

1Follow the procedure in "Before Working on Your Computer" on page 9.

2Remove the computer cover (see "Removing the Desktop Computer Cover" on page 21).

3Gently lift the release lever on the card retention latch to pivot the latch open. The latch remains in the open position.

4Disconnect the PS/2 serial-port cable from the system board (see "Desktop Computer System Board Components" on page 15).

2

3

1

1	card retention latch	2	alignment guide
3	PS/2 serial adapter cable

5Ease the PS/2 serial-port adapter bracket out of its slot.

6If you are removing the adapter permanently, install a filler bracket in the empty card-slot opening.

46

Cards