5Connect the data cable to the system board connector on the system board.
6Follow the procedure in "After Working on Your Computer" on page 17.
7Update the drive configuration information in the system setup program. For more information on using the system setup program, see the Dell Technology Guide on your computer or at support.dell.com.
8Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on page 136).
Removing an Optical Drive Panel Insert
Release the optical drive panel insert by pushing it out of the chassis.
Installing an Optical Drive Panel Insert
1Align the insert with the empty bay opening.
2Install two screws to secure the optical panel insert in place.
NOTE: To comply with FCC regulations, it is recommended that you replace the optical drive panel insert whenever you remove the optical drive from the computer.
Removing the Optical Drive From the Desktop Computer
1Follow the procedure in "Before Working on Your Computer" on page 9.
Drives
59
