1

Before Working on Your Computer

This document provides procedures for removing and installing the components in your computer. Unless otherwise noted, each procedure assumes that:

You have performed the steps in "Before Working on Your Computer" on page 9.

You have read the safety information that shipped with your computer.

When replacing a component, you have already removed the original, if installed.

NOTE: The color of your system and certain system components may appear differently than shown in this document.

Recommended Tools

The procedures in this document may require the following tools:

Small flat-blade screwdriver

Phillips screwdriver

Small plastic scribe

Flash BIOS update (see the Dell Support website at support.dell.com)

Before Working on Your Computer

Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your own personal safety.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty.

Before Working on Your Computer

9

Page 9
Image 9
Dell 360 service manual Before Working on Your Computer, Recommended Tools