Dell 360 service manual Cards

NOTE: Installing filler brackets in empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets also keep dust and dirt out of your computer and maintain the airflow that cools your computer.

7Before you close the card retention mechanism, ensure that:

•The tops of all cards and filler brackets are flush with the alignment guide.

•The notch in the top of the card or filler bracket fits around the alignment guide.

8Secure any remaining card(s) by closing the card retention latch and snapping it into place.

9Follow the procedure in "After Working on Your Computer" on page 17.

Installing or Replacing a PS/2 Serial-Port Adapter in a Desktop Computer

NOTE: If applicable, see "Installing or Replacing a Card in the Optional Riser-Card Cage" on page 52.

NOTE: If you are replacing a card, uninstall the driver for the existing card. For instructions, see the documentation that came with the card.

1Follow the procedure in "Before Working on Your Computer" on page 9.

2Remove the computer cover (see "Removing the Desktop Computer Cover" on page 21).

3Gently lift the release lever on the card retention latch to pivot the latch open. The latch remains in the open position.

4Remove the filler bracket (if applicable).

NOTE: For information on configuring the adapter, making internal connections, or customizing it for your computer, see the documentation that came with the adapter.

Cards

47