1 | drive release latch | 2 | floppy drive |
Replacing or Adding a Floppy Drive or Media Card Reader in the Mini Tower Computer
NOTE: This procedure assumes that you have completed the removal procedure first.
1If you are replacing a floppy drive or media card reader, remove the shoulder screws from the existing drive and attach the screws to the replacement drive.
2If you are installing a new floppy drive or media card reader: a Remove the drive panel insert installed in the drive bay.
b Remove the four shoulder screws from the drive panel insert.
c Attach the shoulder screws to the new drive or media card reader.
Drive Panel Insert
3Align the shoulder screws on the floppy drive or media card reader with the shoulder screw guides in the bay, and gently slide the drive into the bay until it clicks into place.
64
