The SATA interface connectors are keyed for correct insertion; that is, a notch or a missing pin on one connector matches a tab or a
Optical Drive
Removing an Optical Drive From the Mini Tower Computer
1Follow the procedure in "Before Working on Your Computer" on page 9.
2Remove the computer cover (see "Removing the Mini Tower Computer Cover" on page 19).
3Remove the drive bezel (see "Removing the Drive Bezel" on page 25).
4Disconnect the optical drive data cable from the system board connector.
5Disconnect the power cable and the optical drive data cable from the back of the drive.
6Remove the screw securing the optical drive to the optical drive bay.
7Slide the optical drive out through the front of the computer.
8If you are removing the drive permanently:
a Install the drive panel insert (see "Installing an Optical Drive Panel Insert" on page 59).
Drives
57
