1

 

 

 

2

 

 

 

3

 

 

 

4

 

 

 

5

1

release lever

2

card retention latch

3

card

4

card-edge connector

5

card connector

 

 

CAUTION: Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment.

9Connect any cables that should be attached to the card.

10Follow the procedure in "After Working on Your Computer" on page 17.

11IIf you installed a network adapter card and want to turn off the integrated network adapter, use the system setup program. For more information on using the system setup program, see the Dell Technology Guide on your computer or at support.dell.com.

CAUTION: If your computer supports Active Management Technology (AMT), disabling the integrated network adapter also disables AMT functionality.

12Install any drivers required for the card as described in the card documentation.

40

Cards

Page 40
Image 40
Dell 360 service manual Release lever Card retention latch