Emerson Process Management 3400, 3410, 3420, 3422 menu, button, Section, Section, Section, Use the, Click the

Section 5: Startup and meter configuration	Reference, Installation, and Operations Manual
June 2013	3-9000-743 Rev S

Table 5-25 Data Points for Polynomial Wet Calibration

Daniel MeterLink	Data Points, Options and Guidelines
Display Name
Reverse C1	Data points affected:
	•	RevC1
	Options:
	• Enter a value (dimensionless) within the range [0.95,1.05].
	Guidelines:
	• For additional guidelines, see Section 6.1.8 and Daniel MeterLink online help.
Reverse C2	Data points affected:
	•	RevC2
	Options:
	• Enter a value (s/m or s/ft) within the range [-0.1,0.1 s/m].
	Guidelines:
	• For additional guidelines, see Section 6.1.8 and Daniel MeterLink online help.
Reverse C3	Data points affected:
	•	RevC3
	Options:
	• Enter a value (s2/m2 or s2/ft2) within the range [-0.1,0.1 s2/m2].
	Guidelines:
	• For additional guidelines, see Section 6.1.8 and Daniel MeterLink online help.

5.8Saving the meter configuration

It is recommended that, following meter set-up, the meter configuration be saved to a file for future reference. To save the configuration file,

1.Use the Tools}Edit/Compare Configuration menu.

2.Click the Meter Read button and, after the configuration data points are read, click the

File Save button.

170 Saving the meter configuration