Emerson Process Management 3400, 3410, 3420, 3422 Type, “Port C, Section, drawing, Section, Section, DE-21056, User Notes, • Table 3-32, Manual Reference, Description or P/N, Figure 3-26, and Figure

Reference, Installation, and Operations Manual	Meter setup and configuration worksheet
3-9000-743 Rev S	June 2013

Table E-1 Daniel 3400 Series Gas Ultrasonic Flow Meter setup and configuration reference sheet (Sheet 4 of 6)

Type	Description or P/N	Manual Reference		User Notes
• Port C	• RS-232	• Table 3-20,Table 3-31,	“Port C
Series 100 Option Board or		Driver Configuration” on
Series 100 Plus Option Board		page 78, Section 5.3.3
	RS-485 *	• Table 3-32,
	Half Duplex
• Frequency and Digital Output	• Group 1 - frequency and digital	• Section 3.5.2, Figure 3-25,
Switch Settings	outputs (FO1A, FO1B, DO1A,	Figure 3-26,and Figure 3-27
	and DO1B)
	• Group 2 - frequency and digital
	outputs (FO2A, FO2B, DO2A,
	and DO2B)
• Analog (current) input for tem-	• Switch settings configurable for	• Option Board: Section 3.5.3
perature and pressure 4-20 mA	sinking or sourcing current via	Series 100 Plus Option Board
signals via Option Board or	Option Board switches	Analog Output switch settings,
HART® Option Board		Page 3-86
		Table 3-33through Table 3-36
		• Series 100 Option Board analog
		output switch settings, Page 3-83,
		Table 3-37through Table 3-46
		• Appendix Appendix I Daniel
		drawing
		DE-21056

*RS-485 Half Duplex can be used for Modbus Communications with a flow computer but cannot be used for communication with a PC running Daniel MeterLink.

• Configuration Protection	• Protect configuration parame-	•	Section 3.5.8
setting	ters and firmware against	•	Section 5.6
	changes via CPU Board switch
	S2 position 4

Meter setup and configuration worksheet 320