Remote Operation
CALCulate Subsystem Commands
CALCulate:MARKer[1234]:MAXimum:LEFT
Places the marker on the next peak located at a shorter wavelength than the current marker wavelength position. This next peak must meet the peak excursion and threshold criteria. If the specified marker is OFF, it will be turned ON, placed at the center wavelength, and the search to the left will begin from that point.
CALCulate:MARKer[1234]:MAXimum:NEXT
Places the marker on the next highest peak from the current marker ampli- tude. This next highest peak must meet the peak excursion and threshold cri- teria. If the specified marker is OFF, it will be turned ON, placed at the center wavelength, and the search for the next maximum will begin from that point.
CALCulate:MARKer[1234]:MAXimum:RIGHt
Places the marker on the next peak located at a longer wavelength than the current marker wavelength position. This next peak must meet the peak excursion and threshold criteria. If the specified marker is OFF, it will be turned ON, placed at the center wavelength, and the search to the right will begin from that point.
CALCulate:MARKer[1234]:MINimum
Places the specified marker on the lowest point of the trace. The point does not have to meet the pit excursion and threshold criteria. The marker trace is determined by the CALCulate:MARKer:TRACe command. If the specified marker is OFF, it will be turned ON and placed on the lowest point of the trace.
CALCulate:MARKer[1234]:MINimum:LEFT
Places the marker on the next pit located at a shorter wavelength than the current marker wavelength position. This next pit must meet the pit excursion and threshold criteria. If the specified marker is OFF, it will be turned ON, placed at the center wavelength, and the search to the left will begin from that point.