Status Listings
OSA Warnings
Table
Error Number | Error Description [description/explanation/examples] |
|
|
6739 | desc = “Too many peaks or pits” |
| help = “A marker search operation was requested. There are too many valid pits |
| or peaks in the current trace. Reduce the number of valid pits or peaks by |
| increasing the peak or pit excursion setting.” |
6741 | desc = “Constant with multiple Y values” |
| help = “During evaluation of a math expression a constant was encountered |
| which contains more than one Y value. Constants are only permitted to have one |
| Y value.” |
6742 | desc = “Requested amplitude not found” |
| help = “A math expression to search for a specific amplitude in a trace did not |
| succeed. There are no trace points with the desired amplitude.” |
6744 | desc = “Excursion should be in dB” |
| help = “The units for the excursion are not in dB.” |
6745 | desc = “Log of a negative number is not allowed.” |
| help = “During evaluation of a math expression the logarithm of a negative |
| number was encountered.” |
6746 | desc = “Math expression contains a circular reference.” |
| help = “A new math expression was entered. The expression was rejected |
| because it would create a circular reference. For example if trace math for trace |
| C is set to |
| circular reference.” |
6747 | desc = “Next peak not found” |
| help = “A |
| current marker’s trace in the requested direction. To find additional peaks |
| reduce the marker peak excursion setting or adjust sensitivity.” |
6748 | desc = “Next pit not found” |
| help = “A |
| marker’s trace in the requested direction. To find additional pits reduce the |
| marker pit excursion setting or adjust sensitivity.” |
6749 | desc = “Peak not found” |
| help = “A peak search was requested. There are no valid peaks on the current |
| marker’s trace. Try decreasing the marker peak excursion setting or adjust the |
| sensitivity setting.” |