HP 86140A The Traces Menus

Using the Optical Spectrum Analyzer

The Traces Menus

The Traces Menus

The Traces softkeys are accessed by using the front-panel Traces key or the Measure menu Traces selection on the menu bar. If you wish to change trace settings, the front-panel Traces key provides access to the following functions and setup panels:

Function	See....
Active Trace....	“To set the active trace” on page 3-57
Update <trace>	“To set the update function for the trace” on page 3-57
View <trace>	“To set the display function for the trace” on page 3-57
Hold <trace>....	“To set the Hold.... function” on page 3-58
Trace Math....
Default Math Trace C....	“To set the trace math for trace C” on page 3-58
Default Math Trace F....	“To set the trace math for trace F” on page 3-59
Exchange Menu....	“To exchange both the X-axis and Y-axis data of two traces” on
	page 3-59
All Math Off	“To turn all math functions off” on page 3-59
Averaging....	“To set up averaging” on page 3-60
Trace Setup....	“To set the number of points in a sweep” on page 3-60

3-56