Status Listings

OSA Warnings

Table 5-6. OSA Warnings (7 of 11)

Error Number

Error Description [description/explanation/examples]

 

 

5062

desc = “ADC Triggered Sweep Too Fast”

 

help = “A sweep was taken with one of the ADC trigger modes enabled. The

 

sweep rate was too fast to allow trace data to be acquired for every

 

wavelength. To resolve this problem increase sweep time or increase the

 

frequency the external trigger input signal.”

5063

desc = “Key disabled during applications”

 

help = “The key you pressed is not active while an application is running. Exiting

 

the application should re-enable the key.”

5064

desc = “Invalid measurement file”

 

help = “An attempt was made to recall a measurement file which is contains

 

invalid or corrupt data.”

5065

desc = “Error detected in DSP sub-system”

 

help = “ The Digital Signal Processor has reported an unexpected error. Please

 

record the hexadecimal number listed with the error and cycle power. If the error

 

persists, contact the HP support center nearest your location.”

6700

desc = “Math expression input parameter undefined.”

 

help = “A math expression could not be evaluated because one or more input

 

arguments are undefined. Please check the spelling of all input arguments.”

6701

desc = “Math expression input parameter has error.”

 

help = “A math expression could not be evaluated because an error is present on

 

one or more of the input arguments. The error must be cleared before the

 

expression can be evaluated.”

6702

desc = “Math expression parameter has zero length.”

 

help = “A math expression could not be evaluated because one or more input

 

arguments has a zero length. This is often caused when the subset of a trace

 

contains no points such as when advanced line marker functions are turned on

 

and the line markers are too close together. It can also be caused when peak/pit

 

searches find no peaks or pits.”

6720

desc = “Math expression input parameter has error.”

 

help = “A math expression could not be evaluated because of improper input

 

arguments. This could be due to one or more input arguments having the wrong

 

type or size or because one or more inputs are not defined.”

6721

desc = “Internal error in marker search”

 

help => “A marker search function has failed due to an internal software

 

problem. Please try the operation again. If the error persists, contact the HP

 

support center nearest your location.”

5-23