HP 86140A The System Menus

Using the Optical Spectrum Analyzer

The System Menus

The System Menus

The System softkeys are accessed using the front-panel System key or the Options menu System selection on the menu bar. If you wish to change system settings, the front-panel System key provides access to the following functions and setup panels:

Function	See....
Help....
Show Critical Errors....	“To display notices, bandwidth errors, critical errors and
	warnings” on page 3-42
Show BW Errors....	“To display notices, bandwidth errors, critical errors and
	warnings” on page 3-42
Show Warnings....	“To display notices, bandwidth errors, critical errors and
	warnings” on page 3-42
Show Notices....	“To display notices, bandwidth errors, critical errors and
	warnings” on page 3-42
Revision....	“To display the firmware revision” on page 3-42
Set Title....	“To add a title to the display” on page 3-42
Display Setup....	“To change the display setup” on page 3-43
Printer Setup....	“To set up a printer” on page 3-44
Calibration....
Power Cal Setup....	“To perform a power calibration” on page 3-44
Wavelength Cal Setup....	“To perform a wavelength calibration” on page 3-45
Move Active Area	“To move the active function area” on page 3-47

3-40