Solution 2: Print a previously saved version of the document
Solution: Try printing another document from the same software application. If this works, then try printing a previously saved version of the document that is not corrupt.
Cause: The document was corrupt.
Nothing happens when I try to print
Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.
•Solution 1: Turn on the product
•Solution 2: Load paper in the input tray
•Solution 3: Select the correct printer
•Solution 4: Check the printer driver status
•Solution 5: Wait until the product completes the current operation
•Solution 6: Remove all cancelled print jobs from the queue
•Solution 7: Clear the paper jam
•Solution 8: Make sure the print carriage can move freely
•Solution 9: Check the connection from the product to your computer
•Solution 10: Reset the product
Solution 1: Turn on the product
Solution: Look at the On light located on the product. If it is not lit, the product is turned off. Make sure the power cord is firmly connected to the product and plugged into a power outlet. Press the On button to turn on the product.
Cause: The product was turned off.
If this did not solve the issue, try the next solution.
Solution 2: Load paper in the input tray
Solution: Load paper in the input tray.
For more information, see:
“Load full-size paper” on page 18
Cause: The product was out of paper.
If this did not solve the issue, try the next solution.
Solution 3: Select the correct printer
Solution: Make sure you have selected the correct printer in your software application.
Print troubleshooting | 105 |
Troubleshooting
