Chapter 11
6.On the inside of the product, locate the contacts in the print head.
The contacts look like a set of four copper or
7.Use a dry swab or
8.Reinstall the ink cartridge.
9.Close the ink cartridge door, and check if the error message has gone away.
10.If you still receive the error message, turn the product off, and then on again.
Cause: The electrical contacts needed to be cleaned.
If this did not solve the issue, try the next solution.
Solution 3: Close the print carriage latch
Solution: Make sure that the latch securing the print head is securely closed. Leaving the latch handle raised can result in incorrectly seated ink cartridges and problems printing. The latch must remain down in order to correctly install the ink cartridges.
Troubleshooting
162 Troubleshooting