Chapter 7
To print a multiple-page document as a booklet
1.Load paper into the input tray.
The paper should be thick enough so that the images do not show through to the other side.
2.On the File menu in your software application, click Print.
3.Make sure the product is the selected printer.
4.Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer, or Preferences.
5.Click the Features tab.
6.In the Paper saving options area, select Manual from the
7.Select the binding edge from the Booklet layout is list, as appropriate for your language.
•If your language reads
•If your language reads
The Pages per sheet box is automatically set to two pages per sheet.
8.Click OK, and then click Print or OK in the Print dialog box. The product begins printing.
A dialog box displays instructions on the screen when it is time to process the second side of your job. Do not click Continue in the dialog box until you have reloaded the paper as instructed in the following steps.
9.Wait until the product has stopped printing for several seconds before removing any of the printed pages from the output tray.
If you remove the pages while the document is still printing, the pages might get out of order.
10.Follow the instructions that appear on your screen for reloading the paper to print on the second side, and then click Continue.
11.When the entire document has finished printing, fold the stack of paper in half, so that the first page is on top, then staple the document along the crease.
TIP: For best results, use a saddle stapler, or a
Figure 7-1 Left-edge binding for left-to-right languages
44 Print from your computer