Chapter 11

The product is printing on a non-printable area of my disc

The design is not centered on my disc

The ink on the CD/DVD is not drying

The product reports a CD/DVD size mismatch error

The CD/DVD holder is stuck in the storage area

The product does not detect the CD/DVD holder

Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.

Solution 1: Push the CD/DVD holder into the CD/DVD tray

Solution 2: Remove the CD/DVD holder from the storage area

Solution 3: Place the CD/DVD on the CD/DVD holder

Solution 4: Load the next disc on the CD/DVD holder

Solution 1: Push the CD/DVD holder into the CD/DVD tray

Solution: Push the CD/DVD holder forward into the CD/DVD tray until the lines on the holder line up to the white lines on the tray. The end of the holder marked with arrows goes into the CD/DVD tray first.

Cause: You did not push the CD/DVD holder far enough into the CD/DVD tray. If this did not solve the issue, try the next solution.

Troubleshooting

118 Troubleshooting

Page 119
Image 119
HP D5400 manual Product does not detect the CD/DVD holder, Solution 1 Push the CD/DVD holder into the CD/DVD tray