TeemTalk Connection Configuration
Printer Extent
Default: Full Tab
The setting of this option determines whether the contents of the entire page is printed, or just the scrolling region.
Printer close delay (secs)
Default: 5
If you find a through print results in data being split into lines, each treated as a separate print job, specify a time delay here (e.g. 5 sec- onds). This will enable the next line of data to be sent before the print job is assumed to have finished and therefore prevents the print job from being closed prematurely.
When set to 0, TeemTalk will not start printing until it receives a 'print end of job' command from the host. Entering any other number will cause TeemTalk to print after the specified number of seconds have elapsed, regardless of whether the 'print end of job' command has been received from the host. If you require the port to be kept open all the time (to stop the printer resetting) enter
The TeemTalk General Settings Dialog | 137 |