Conduit Adapters

C-7

ACCESSORIES

C-7

Return to Section TOC

Return to Master TOC

MAGNUM 200/300/400 GUNS

The easiest and least expensive way to use Magnum 200/300/400 guns with the Power Feed 10 wire feed- er is to order them with the K466-10 connector kit, or to buy a completely assembled Magnum gun having the K466-10 connector (such as the K471-21, -22, and -23 dedicated Magnum 400 guns and the K497- 20 and -21 Magnum 200 guns).

MAGNUM 550 GUNS

The easiest and least expensive way to use the Magnum 550 guns with Power Feed 10 wire feeders is to order the gun with the K613-7 connector kit, and install a K1500-3 gun connection kit to the wire feeder.

LINCOLN INNERSHIELD AND SUB ARC GUNS

All of these guns can be connected to the Power Feed by using the K1500-1 Adapter Kit.

LINCOLN FUME EXTRACTION GUNS

The K556 (250XA) and K566 (400XA) guns require that a K489-2 Fast-Mate™ adapter kit be installed. Installation of this adapter also requires a K1500-1 gun connector kit.

The K206, K289, and K309 require only the installa- tion of a K1500-1 connector in the Power Feed wire feeder.

NON-LINCOLN GUNS

Most competitive guns can be connected to the Power Feed by using one of the K1500 series adapter kits.

K1500-1 (LINCOLN INNERSHIELD GUN STANDARD CONNECTION)

Use this kit to connect the following guns: Guns hav- ing a Lincoln standard innershield gun connector, Fast-Mate™ guns with K489-2 Fast-Mate™ Adapter Kit, Magnum 200/300/400 with K466-1 connector kit, and Magnum 550 guns with the K613-1 gun connec- tion kit.

K1500-2 (TWECO™ #2-#4 CONNECTION)

The K1500-2 gun adapter comes factory installed on the Power Feed 10 wire feeder. Use this adapter for guns that have a Tweco™ #2-#4 connector. Such guns include Magnum 200/300/400 guns with K466- 10 connector kit, and completely factory assembled Magnum guns that are factory equipped with the K466-10 connector (such as the K497-21 dedicated Magnum 400).

K1500-3 (TWECO™ #5 CONNECTION)

The K1500-3 gun adapter is for Magnum 550 guns with a K613-7 connection kit, and any other gun hav- ing a Tweco™ #5 connector.

K1500-4 (MILLER CONNECTION) for any gun hav- ing a Miller connector.

Install gun adapters per the instructions shipped with them.

K1546-1 ADAPTER

For use with Lincoln Magnum conduit (wire sizes 0.023 to 0.052)

Install the K1546-1 gun adapter at the incoming end of the feed plate, secure with the set screw located at the back of the feed plate. If a brass fitting is supplied with the conduit, remove it from the feeder end of the conduit by unscrewing it. Insert the conduit into the K1546-1, secure the conduit by fastening it to the adapter with the supplied knob screw.

K1546-2 ADAPTER

For use with Lincoln Magnum conduit (wire sizes 1/16 to 0.120)

Install the K1546-2 gun adapter at the incoming end of the feed plate; secure with the set screw located at the back of the feed plate. If a brass fitting is supplied with the conduit, remove it from the feeder end of the conduit by unscrewing it. Insert the conduit into the K1546-2, secure the conduit by fastening it to the adapter with the supplied knob screw.

POWER WAVE 455/POWER FEED 10

Lincoln Electric SVM135-B service manual Conduit Adapters

Models: SVM135-B