Creating a Calling Group and Assigning Group Members
You must create a MERLIN Messaging System Calling Group and assign the group members (MERLIN
Messaging System ports).
To create a Calling Group and assign group members:
Step Programming Task Console Input/Selection PC Input/Selection
1Enter Programming mode Sys Program
Exit/Start [any key]
2Select Extensions Extensions
3Display next menu page /
4Select Group Calling Grp Calling
5Select Members Members
6Enter the extension of the MERLIN
Messaging System Calling Group [nnnn] Enter [nnnn]
7Enter the members of the MERLIN
Messaging System Calling Group [nnnn] Enter [nnnn]
8Repeat Step 7 for all active MERLIN
Messaging System voice ports
9Confirm that all members are entered
in the correct order
10 Return to the Group Calling menu Exit/Back
11 Select Hunt Type Hunt Type
12 Enter the extension of the MERLIN
Messaging System Calling Group [nnnn] Enter [nnnn]
13 Specify Linear Hunt Group Linear
Enter
14 Display next menu page /
15 Select Group Type Group Type
16 Enter the extension of the MERLIN
Messaging System Calling Group [nnn] Enter [nnn]
17 Select Integrated VMI Integ VMI
Enter
Creating a MERLIN Messaging System Calling Group
http://www.sostc.com/lucent/installation/programming_communication/mmipcpmp4.htm (1 of 2) [2/2/2000 2:32:24 PM]