Lucent Technologies merlin messaging system

Programming a Direct Voice Mail Button

Direct Voice Mail allows an inside caller to call directly or transfer a call directly to another user’s voice

mailbox. It can be programmed at the user’s telephone or through Centralized Telephone Programming.

The Centralized Telephone Programming procedure is documented below.

To program a Direct Voice Mail button:

Step Programming Task Console Input/Selection PC Input/Selection

1Enter Programming mode

Sys Program

Exit/Start

[any key]

2Display next page of menu /

3Select Centralized

Telephone Programming Cntr-Prg

4Select Program Extension Program Ext

5Enter the extension you want

to program [nnn] Enter [nnn]

6Start Centralized Telephone

Programming Start

7Select line/feature button Press button on console or + function

key, then

8Select Direct VM feature or

ListFeature

Direct VM

Function key corresponding to

Direct VM

9Return to System

Programming menu Sys Program

Exit/Back

Procedures

Programming Coverage Inside

Programming an Auto Dial Button

Programming Coverage VMS Off

Programming a Direct Voice Mail Button

http://www.sostc.com/lucent/installation/programming_the_communication_system/mmipcpcs9f.htm [2/2/2000 2:34:00 PM]