Programming the Call Answer Service Operator Extension
The Call Answer Service (CAS) Operatorextension is the extension to which calls will be
transferred in a number of situations. Click here for a list of CAS Operator transfer criteria.
Note:
The factory setting for the Call Answer Service Operator is 768.
It is recommended that you do not change the factory setting.
Refer to System Planning Form 1 – System Parameters for the CAS Operator Extension
identified for your site.
To program the CAS Operator extension:
Step Programming Task Touch-Tone Input
1Log in to System Administration, if needed
2Select System Parameters
3Select Call Answer Service Operator
4Enter Call Answer Service Operator extension [nnn]
Programming the Call Answer Service Operator Extension
http://www.sostc.com/lucent/ongoingmaintenance/managingsystem/modsysparams/mmipcpmm7.htm [2/2/2000 2:34:30 PM]