Creating a MERLIN Messaging System Calling Group
You must create a MERLIN Messaging System Calling Group and assign the Group Members (MERLIN
Messaging ports).
To create a Calling Group and assign Group Members:
Step Programming Task Console Input Selection PC Input Selection
1Enter Programming mode Sys Program
Exit/Start [any key]
2Select Extensions Extensions
3Display next menu page
4Select Group Calling Grp Calling
5Select Members Members
6Enter the extension of the MERLIN
Messaging System Calling Group [nnnn] Enter [nnnn]
7Enter the members of the MERLIN
Messaging System Calling Group [nnnn] Enter [nnnn]
8Repeat Step 7 for all active MERLIN
Messaging System voice ports
9Confirm that all members are entered
in the correct order
10 Return to the Group Calling menu Exit
11 Select Hunt Type Hunt Type
12 Enter the extension of the MERLIN
Messaging System Calling Group [nnnn] Enter/Back [nnnn]
13 Specify Linear Hunt Group Linear
Enter
14 Display next menu page
15 Select Group Type Group Type
16 Enter the extension of the MERLIN
Messaging System Calling Group [nnn] Enter [nnn]
17 Select Integrated VMI Integ VMI
Enter
Creating a MERLIN Messaging System Calling Group
http://www.sostc.com/lucent/installation/prog_merlin_mess/mmipcpmp4.htm (1 of 2) [2/2/2000 2:34:37 PM]