Lucent Technologies merlin messaging system - page 321

Programming the General Mailbox Owner(s)
The MERLIN Messaging System provides four General Mailboxes — one for each Automated Attendant.
The General Mailbox Owner is the extension whose Message-Waiting light is turned on whenever a message is
placed in the General Mailbox. The factory setting for the General Mailbox Owner is Extension 10. You can
program a different General Mailbox Owner for each General Mailbox or you can have the same owner for all the
General Mailboxes.
Refer to System Planning Planning Form 1 - System Parameters for the General Mailbox
Owner extension(s) identified for your site.
Step Programming Task Touch-Tone Input
1Log in to System Administration, if needed
2Select System Parameters
3Select General Mailbox Owner
4Enter Automated Attendant number -
5Enter General Mailbox Owner's extension [nnn]
6Repeat Steps 3–5 for each Automated Attendant
Programming the General Mailbox Owner
http://www.sostc.com/lucent/ongoingmaintenance/managingsystem/modsysparams/mmipcpmm8.htm [2/2/2000 2:34:30 PM]