Assigning Automated Attendant Extensions
You can assign up to 10 Automated Attendant extensions. An Automated Attendant extension is
one that sends the caller to one of the four Automated Attendants. You can also assign a new
Delayed Call Handling Calling Group Extension as an Automated Attendant extension with
no-telephone associated. You can also administer a Directory Listing or Recorded Name.
Refer to System Planning Form 2 – Extension Administration for the Automated Attendant
Assignment information identified for your site.
To assign an Automated Attendant extension:
Step Programming Task Touch-Tone Input
Required Steps
1Log in to System Administration, if needed
2Select Extension Administration
3Enter extension number [nnn]
4Assign Automated Attendant to extension
5Enter Automated Attendant number [1–4]
6Choose one of the following:
If a telephone is associated with this extension●
If a telephone is not associated with this extension●
7Choose one of the following:
Program Directory Listing or Recorded Name●
Delete this extension
Confirm❍
Cancel❍
●
If finished administering the extension●
or
Procedures
Assigning Mailbox Extensions
Assigning Transfer-Only Extensions
Assigning Fax Extensions
Assigning Automated Attendant Extensions
http://www.sostc.com/lucent/installation/prog_merlin_mess/mmipcpmm13.htm [2/2/2000 2:32:42 PM]