Lucent Technologies merlin messaging system

Programming an Auto Dial Button

You can program an Auto Dial button to provide one-touch dialing into the MERLIN Messaging System.

Auto Dial Button programming can be at the user’s telephone or through Centralized Telephone

Programming. The Centralized Telephone Programming procedure is documented below.

To program an Auto Dial button:

Step Programming Task Console Input/Selection PC Input/Selection

1Enter Programming mode

Sys Program

Exit/Start

[any key]

2Display next page of menu /

3Select Centralized Telephone

Programming Cntr-Prg

4Select Program Extension Program Ext

5Enter the extension you want to

program [nnn] Enter [nnn]

6Start Centralized Telephone

Programming Start

7Select line/feature button Press button on console or +

function key, then

8Select Auto Dial Inside feature or

ListFeature

AutoDial

Inside

Enter

Function key,

corresponding to Auto

Dial

9Enter the extension number of the

MERLIN Messaging System

Calling Group

[nnn] Enter [nnn]

Programming an Auto Dial Button

http://www.sostc.com/lucent/installation/programming_the_communication_system/mmipcpcs9a.htm (1 of 2) [2/2/2000 2:33:57 PM]