Lucent Technologies merlin messaging system - page 247

Assigning Outside Lines or Pools to Delayed Call Handling Calling Group
When setting up the MERLIN Messaging System for Delayed Call Handling, first select an unused
Calling Group extension with no members (phantom Calling Group). Next, use this procedure to program
the outside lines or pools assigned to the buttons on the DLC Operator position to ring directly into the
phantom Calling Group.
To assign outside lines or pools to Delayed Call Handling Calling Group:
Step Programming Task Console Input/Selection PC Input/Selection
1Enter Programming mode
Sys Program
Exit/Start
[any key]
2Select Extensions Extensions
3Display next page of menu /
4Select Group Calling Grp Calling
5Select Line/Pool Line/Pool
6Enter extension number of Delayed
Call Handling Calling Group [nnn] Enter [nnn]
7Enter line/trunk or pool number.
Repeat this step for each line/trunk
or pool that you want to ring
directly into Delayed Call Handling
Group.
[nnn] Enter [nnn]
8Return to Extensions menu Exit/Back
9Select Group Calling Grp Calling
10 Select Group Coverage GrpCoverage
11 Enter Extension number of
MERLIN Messaging System
Calling Group
[nn] Enter [nn]
12 Enter Coverage Group number [nnn] Enter [nn]
13 Return to System Programming
menu Exit/Back
Exit/Back
Exit/Back
Assigning Outside Lines or Pools to Delayed Call Handling Calling Group
http://www.sostc.com/lucent/installation/programming_the_communication_system/assoutline.htm [2/2/2000 2:33:42 PM]