Lucent Technologies merlin messaging system - page 331

Assigning Lines to the Voice Port Used for Outcalling
If outcalling is used for the communications system operating in Key mode, you must assign one or
more outsides line to the MERLIN Messaging System ports used for Outcalling (port 2 on a 2-port
system, port 4 on a 4-port system or port 6 on a 6-port system). You must also set the lines to no ring to
ensure proper operation.
To add an outside line to the extension used for Outcalling in Key mode:
Step Programming Task Programming Console PC
1Enter programming mode Sys Program
Exit/Start [any key]
2Select Extensions Extensions
3Select Lines/Trunks Lines/Trunks
4Enter the extension number you want
to program [nnn]
Enter
[nnn]
5Add the Outcalling line assignments
by selecting each line button and
turning on the green Message-Waiting
light
Press line button or
console
or
+ function key
6Press Exit when you have finished
adding the Outcalling lines to that
extension
Exit/Back
7Return to System Programming menu Exit/Back
Exit/Back
Procedures
Creating a MERLIN Messaging System Calling Group
Enabling Rotary Signaling
Setting the Outcalling Lines to No Ring
Assigning Lines to the Voice Port Used for Outcalling
http://www.sostc.com/lucent/installation/prog_merlin_mess/mmipcpmp3.htm [2/2/2000 2:34:36 PM]