Programming Line Assignments
This procedure only applies to systems that use more than one Automated Attendant. Skip
this procedure if your system uses a single Automated Attendant.
Note:
Refer to MERLIN Messaging System Planning Form 4 – Line Assignments for
the site-specific information you need to complete the following programming task.
●
If you want a line to be answered by Automated Attendant 1, no programming is
needed.
●
If you want a line to be answered by Automated Attendant 2, 3 or 4, you must enter
the line number and identify which Automated Attendant should answer it.
●
MERLIN Messaging System allows a maximum of 80 line assignments among all
Automated Attendants.
●
The procedure for deleting lines is covered Path 3: Ongoing Maintenance and
Administration, "Managing the MERLIN Messaging System."
●
To program Line Assignments:
Step Programming Task Touch-Tone Input
1Log in to System Administration, if needed
2Select Automated Attendant
3Select a specific Automated Attendant [1-4]
4Select Line Assignments
5Choose one of the following:
Review Line assignment●
Add a line to Automated Attendantthen●
Re–enter line number● [nnn]
6Repeat Step 5 for each line you want to add to this
Automated Attendant
7If finished with Line Assignment programming
Procedures
Modifying a Day or Night Menu
Creating a Submenu
Modifying a Submenu
Deleting a Submenu
Creating Announcements
Modifying an Announcement
Deleting an Announcement
Programming Line Assignments
http://www.sostc.com/lucent/ongoingmaintenance/managingsystem/modaap/mmipcpmm21.htm (1 of 2) [2/2/2000 2:34:57 PM]