Lucent Technologies merlin messaging system

Programming a Delete Message Button

For all multiline telephones except MLX

The Delete Message feature turns off a user’s Message-Waiting light and deletes the label that appears on the

display. It does not delete voice mail messages. This feature can be programmed at the user’s telephone or

through Centralized Telephone Programming. The Centralized Telephone Programming procedure is

documented below.

To program a Delete Message button:

Step Programming Task Console Input/Selection PC Input/Selection

1Enter Programming mode

Sys Program

Exit/Start

[any key]

2Display next page of menu /

3Select Centralized Telephone

Programming Cntr-Prg

4Select Program Extension Program Ext

5Enter the extension you want to

program [nnn] Enter [nnn]

6Start Centralized Telephone

Programming Start

7Select line/feature button Press button on console or +

function key, then

8Select Message Delete feature or

ListFeature

MsgDelete

Function key

corresponding to

MsgDelete

Programming a Delete Message Button

http://www.sostc.com/lucent/installation/programming_the_communication_system/mmipcpcs9b.htm (1 of 2) [2/2/2000 2:34:01 PM]