Logging in to Terminal-Based Reporting, Maintenance and
Administration
Before you log in, you must connect your PC to the MERLIN Messaging System module. The following
procedures are the two access methods available for accessing the MERLIN Messaging System.
Establishing a Local Session●
Establishing a Remote Session●
After you configure your terminal emulator for a local or remote session, start the program and connnect
to the MERLIN Messaging System. Once your PC is connected to the MERLIN Messaging System and
you have a login prompt, use the following procedure to log in to MERLIN Messaging System
Administration.
Step Action Remote Access Local Access
1Access MERLIN Messaging System Dial in to MERLIN
Messaging System Connect RS-232 cable
to RS-232 serial port
2A Welcome to Merlin Messaging
message
3Enter login
Note:
If you do not enter your login
within 30 seconds, MERLIN
Messaging terminates the
session.
[nnnnnn]
[nnnnnn]
4Enter the System Administration
password
Note:
If you do not enter your login
within 30 seconds, MERLIN
Messaging terminates the
session.
[nnnnnn]
[nnnnnn]
Related Topics
System Validation
Logging in to Terminal-Based Reporting, Maintenance and Administration
http://www.sostc.com/lucent/ongoingmaintenance/terminalbased/mmomali1.htm [2/2/2000 2:35:11 PM]