Backing Up the System to the PC Card
Following MERLIN Messaging System programming, you can back up programmed
configuration data and a subset of the Automated Attendant menu, submenu and announcement
prompts onto the PC Card. The backed up information may be used to perform a system restore if
the system fails or if data becomes corrupted.
If you need your entire system backed up and restored, use the PC-based system administration
software. See the MERLIN Messaging Release 2 System Administration Guide for more
information.
Note:
The MERLIN Messaging System must be in an idle state in order for the backup to
begin.
●
Prior to starting the backup process, the system will busy-out the messaging ports.●
During the backup process, the system does not answer calls.●
Backing up the PC Card can take up to 20 minutes.●
To back up the system:
Step Programming Task Touch-Tone Input
1Log in to System Administration, if needed
2Select System Backup
3Select Backup, then choose one of the
following:
Confirm●
Cancel●
or
4If finished
Backing Up the System
http://www.sostc.com/lucent/installation/prog_merlin_mess/mmipcmmpsb.htm [2/2/2000 2:33:20 PM]