Lucent Technologies merlin messaging system - page 126

Enabling Rotary Signaling
In order for the MERLIN Messaging System to be able to transfer calls, turn the Message-Waiting Lights On and Off,
and perform Outcalling, all MERLIN Messaging System voice ports must be programmed as rotary enabled.
To enable rotary signaling:
Step Programming task Console Input/Selection PC Input/Selection
1Enter Programming mode Sys Program
Exit/Start [any key]
2Select Extensions Extensions
3Display third page of menu /
/
4Select Rotary Enable RotaryEnabl
5Enter the extension number of the
MERLIN Messaging System voice port [nnn] Enter [nnn]
6Repeat Step 5 for all voice ports
7Make sure all MERLIN Messaging
System voice ports are rotary enabled.
8Return to the System Programming
menu Exit/Back
Exit/Back
Procedures
Creating a Calling Group and Assigning group Members
Assigning Lines to the Voice Port Used for Outcalling in Key Mode
Setting the Outcalling Lines to No Ring
Enabling Rotary Signaling
http://www.sostc.com/lucent/installation/programming_communication/mmipcpmp5.htm [2/2/2000 2:32:25 PM]