Lucent Technologies merlin messaging system Programming the Message-Waiting Receiver

Programming the Message-Waiting Receiver
When a Calling Group has a mailbox, it is useful to designate an extension as a Message-Waiting Receiver for
the Calling Group. The Message-Waiting lights on the designated extension whenever a caller leaves a
message for the Calling Group.
To confirm the Message-Waiting Receiver:
Step Programming Task Console Input/Selection PC Input/Selection
1Enter programming mode
Sys Program
Exit/Start
[any key]
2Select Extensions Extensions
3Display next page of menu /
4Select Group Calling Grp Calling
5Select Message-Waiting Receiver Message
6To erase current setting or
Backspace +
7Enter the extension number of the
Calling Group [nnn]
Enter
[nnn]
8Enter the extension number of the
telephone you want to assign as
Message-Waiting Receiver
[nnn]
Enter
[nnn]
9Return to System Programming menu Exit/Back
Exit/Back
Programming the Message-Waiting Receiver
http://www.sostc.com/lucent/installation/programming_the_communication_system/mmipcpcs7.htm [2/2/2000 2:33:55 PM]