Assigning a Transfer-Only Extension
You can assign up to 400 Transfer-Only extensions. Transfer-Only extensions do not require a
mailbox (view example). When you assign a Transfer-Only extension, you are prompted to
administer a Directory Listing and/or Recorded Name.
Refer to MERLIN Messaging System Planning Form 2 – Extension Administration for the
Transfer-Only Assignment information identified for your site.
To assign a Transfer-Only extension:
Step Programming Task Touch-Tone Input
Required Steps
1Log in to System Administration, if needed
2Select Extension Administration
3Enter extension number [nnn]
4Assign Transfer-Only permission to this extension
5Choose one of the following:
Directory Listing or Recorded Name●
Delete this extension
Confirm❍
Cancel❍
●
If finished●
Note:
The Assigning Transfer-Only Extensions feature also allows you to delete the extension.
This procedure is covered in Path 3 - Ongoing Maintenance and Administration,
"Managing the MERLIN Messaging System."
Procedures
Assigning Mailbox Extensions
Assigning Automated Attendant Extensions
Assigning Fax Extensions
Assigning a Transfer-Only Extension
http://www.sostc.com/lucent/installation/prog_merlin_mess/mmipcpmm12.htm [2/2/2000 2:32:41 PM]