Lucent Technologies merlin messaging system - page 223

To set the VMS Transfer Return Interval:
Step Programming Task Console Input/Selection PC Input/Selection
1Enter Programming mode
Sys Program
Exit/Start
[any key]
2Select Auxiliary Equipment AuxEquip
3Select Voice Messaging
System/Automated Attendant VMS/AA
4Select Transfer Return TransferRtn
5Erase current number of rings Drop or
Backspace
6Enter number of rings before
calls are returned from transfer [n] Enter [n]
7Return to System Programming
menu Exit/Back
Exit/Back
Procedure
Redirecting Calls Sent to Unassigned Extensions
To set the VMS Transfer Return Interval
http://www.sostc.com/lucent/installation/programming_the_communication_system/mmipcpcs2b1.htm [2/2/2000 2:33:24 PM]