Lucent Technologies merlin messaging system

Programming System Date and Time

You must set the system date and time. These parameters cannot be set independently of each other; both date and

time must be set.

To program the System Date and Time:

Step Programming Task Touch-Tone Input

1Log in to System Administration, if needed

2Select System Parameters

3Select System Date and Time

4Choose one of the following:

Enter date

Example: February 26, 2000 = 022600

●

Keep current date●

[mmddyy] or

5Choose one of the following:

Enter time (24-hour clock)

Example: 3:45PM = 1545

●

Keep current time●

[hhmm] or

6Choose one of the following:

Approve●

Re-enter

(Return to Step 4)

●

Procedures

Programming System Language Mode and System Language

Programming Call Answer Service Operator Extension

Programming General Mailbox Owner(s)

Programming Maximum Extension Length

Programming System Date and Time

http://www.sostc.com/lucent/installation/prog_merlin_mess/mmipcpmm6.htm [2/2/2000 2:32:34 PM]