Powerware 100160 kVA manual System Meters Screens, Total System

Using the Control Panel

9.2.7 System Meters Screens

The System Meters screens show the total system and individual UPS unit meter readings from any unit, when a parallel system is installed. The default voltage displayed on these screens is phase-to-neutral. However, an authorized Eaton Customer Service Engineer can change the screens to display the voltage phase-to-phase (A-B, B-C, C-A).

Press the METERS pushbutton on the main menu bar to display the Unit Meter screens.

Press the SYSTEM pushbutton on the menu bar to display the System Meters screen.

Use the or pushbuttons to highlight the Total System meter or Unit meters desired, then press the SELECT pushbutton to display the screen.

SYSTEM METERS

TOTAL SYSTEM

UNIT 1

UNIT 2

UNIT 3

UNIT 4

SELECT

Figure 9-31. System Meters Screen

9-28EATON Powerware® 9390 UPS (100–160 kVA) Installation and Operation Manual S 164201604 Rev B powerware.com