Promise Technology 66 Pro user manual Getting Started, Unpacking SuperTrak66

SuperTrak66™ User's Manual Chapter 2

Getting Started

This chapter is designed to help you prepare SuperTrak66 for installation into Windows NT 4.0 system servers. Please read through this chapter carefully before attempting to install SuperTrak66. Users should record their current CMOS (system setup) settings before making any changes. This preventative measure is aimed at protecting such information from loss, which may happen unpredictably and/or periodically during any hardware installation.

2.1Unpacking SuperTrak66

The SuperTrak66 package should contain the following items:

∙SuperTrak66 controller card

∙SuperTrak66 User’s Manual

∙SuperTrak66 OS drivers & utility diskettes (3)

∙Internal 18” Ultra ATA/66 80-wire/40-pin hard drive cables (4)

NOTE: Unit may ship with 16MB 72-pin EDO SIMM

If any of the items are missing or appear damaged, please contact your dealer or distributor immediately.

NOTE: The SuperTrak66 controller card ships with two removable protective labels that cover the audible alarm buzzer device (see Figure 1) and the battery (see Figure 1) which maintains the non-volatile RAM memory. These labels must be removed prior to installing the card.

- 5 -