SuperTrak66™ User's Manual | Chapter 3 |
3.4 View Drive Assignments
By pressing [2] on the “Main Menu” screen, the “View Drive Assignments” screen is displayed (below). This screen does not allow modifications to any of the four fields.
Figure 8: View Drive Assignments screen
Channel: ID
This field shows the SuperTrak66 controller channel ID
Drive Model
This field identifies the manufacturer, model, and model number (if applicable) of each drive installed on the SuperTrak66 card.
Capacity (MB)
This field reflects the capacity in MB (megabytes) of each drive.
Assignment
This field identifies the array to which each drive belongs. Assigned drives are labeled with their disk array (1,2,3, etc...). Unassigned drives are labeled “free,” and are considered "hot spares" to provide fault tolerance. Unassigned drives may also be used to create a new array at any time.
- 21 -
