Functions 9000-DVS 1 Chapter

Yes: Can be used No: Cannot be used

Attribute

 

Region

 

 

 

 

 

 

M/E-1, M/E-2, M/E-3, and

USER 1 to USER 8

DME 1 to DME 8

 

PGM/PST

 

 

 

 

 

 

Effect dissolve

Yes

Yes

Yes

 

 

 

 

Auto transition

Yes

No

No

 

 

 

 

GPI outputs b)

Yes

Yes

No

a)Applicable only as temporary attributes, but not applicable by a menu operation.

b)Applicable only by a menu operation.

Attribute display

You can view the attributes of a snapshot in the Snapshot menu.

For more details, see “Snapshot Operations in the Menus” in Chapter 14 (Volume 2).

Temporary attributes

When recalling a snapshot, you can temporarily apply attributes distinct from the attributes set for each register. These are called “temporary attributes.” You can set temporary attributes when recalling a snapshot.

For details of snapshot operations, see Chapter 14 “Snapshots” (Volume 2).

Bus override

If you recall a snapshot while holding down an A or B bus button, the selection of the signal on the A or B bus does not change when the snapshot is recalled. This function is called “bus override.”

This function is effective when cross-point hold is off, and you want to temporarily maintain the cross-point setting. When cross-point hold is on, the above operation is not necessary.

142 Snapshots