Video Process Settings

This section describes operations on the M/E-1 to M/E-3, and PGM/PST background A and B buses, and utility buses 1 and 2.

For these operations, use the Misc>Video Process menu in the respective operating bank.

For video process settings on other buses, see the following.

•Settings for a particular input signal: “Signal input settings” in Chapter 16 (Volume 2)

•Key fill bus settings: “Video Processing” (page 286)

•Settings for frame memory source buses 1 and 2: “Setting video processing” (page 353)

•Settings for Aux 1 to 48 buses: “Making video process settings for an AUX bus” (page 378)

•Overview of video process: “Video Process” (page 83)

This section describes an example on the background A bus of the M/E-1 bank. For the background B bus or utility bus 1 or 2, make the adjustment with a similar procedure.

Making video process settings for each bus

Use the following procedure.

1 In the menu control block, press the top menu selection button [M/E1] and select VF7 ‘Misc’ and HF2 ‘Video Process.’

2 In the <Bkgd-A> group, press [Video Process], turning it on.

3 Adjust the following parameters.

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

Video Gain

Video signal gain

−200.00 to +200.00

 

 

 

 

2

Y Gain

Luminance signal gain

−200.00 to +200.00

 

 

 

 

3

C Gain

Chrominance signal gain

−200.00 to +200.00

 

 

 

 

4

Hue Delay

Hue delay

−180.00 to +180.00

 

 

 

 

5

Black Level

Black level

−7.30 to +109.58

 

 

 

 

To return the parameter settings to the defaults

Press [Unity] in the <Bkgd-A> group.

.Etc Menu, Misc 10 Chapter

Video Process Settings 379